Available on

Grain Handling Standard (29CFR 1910.272) Audit Mobile App

The Occupational Safety and Health Administration's Grain Handling Standard, 29CFR 1910.272, forms the heart of the safety standards grain elevator and feed mill operators must follow in providing a safe workplace for employees. In the Grain Handling Standard (29CFR 1910.272) Audit mobile app, you'll find a self-audit checklist you can use to make sure you're in compliance with every detail of the standard. The app covers emergency action plan, training, hot work permit, entry into grain handling structures, entry into flat storage structures, contractors, housekeeping, grate openings, filter collectors, preventive maintenance, grain stream processing equipment, emergency escape, continuous-flow bulk grain dryers and inside bucket elevator.

Agriculture, Forestry & Fishing mobile forms and apps for your team

Convert your inefficient paper Audits and other forms to mobile versions with GoCanvas.

Want to learn more about GoCanvas?

Request a Demo

Take a Tour

Take a peek inside the Grain Handling Standard (29CFR 1910.272) Audit Mobile App

Included Features

Our App Builder gives you the power to easily add and remove the ones you want. {{controller.show_all ? 'See included features.' : 'See more features.'}}

{{data.title}}

Included Fields

Customize to add, remove, or edit any of the fields below.

The Occupational Safety and Health Administration's Grain Handling Standard, 29CFR 1910.
) Has an emergency action plan that complies with the requirements of 1910.
) Is appropriate job training provided to employees at least annually?
) Is training provided when changes in job assignment will expose employees to new hazards?
3) Are current employees, prior to starting work, trained in at least the following:
(a) General safety precautions associated with the facility?
(b) Preventive measures for the hazards related to dust accumulations and common ignition sources?
(c) Procedures and safety practices applicable to their job tasks, such as choked legs, hot work,...
(d) Special assignments, such as bin entry and handling flammable or toxic substances?
) Is a hot work permit required in all situations other than the three exceptions stated below?
*When the person who would normally issue the permit is present while the hot work is being perfo...
*In welding shops authorized by the employer.
*In hot work areas authorized by the employer that are located outside of the grain handling stru...
) Does the hot work permit certify that all of the requirements of 1910.
Note: Section (g) applies to entry into bins, silos, tanks, and other grain storage structures.
) Is a written permit issued for entry?
Exception: A written permit is not required if the employer or his designated representative is p...
) Does the permit certify that the precautions contained in this section (Section (g)) have been ...
) Is all equipment (mechanical, electrical, etc.
) Is the internal atmosphere in the space tested for the presence of combustible gases, vapors, a...
) Is the internal atmosphere in the space tested for oxygen content unless there is continuous na...
) If the oxygen level is less than 19.
(a) Ventilation is provided until the unsafe condition(s) are eliminated, and the ventilation is ...
(b) The entrant wears an appropriate respirator if the toxicity or oxygen deficiency cannot be el...
(c) Respirator use is in accordance with the requirements of 29CFR 1910.
) Is the practice of "walking down grain" strictly prohibited?
8) Is a lifeline with a body harness or a boatswain's chair used under the following two conditions:
(a) Whenever entry is made at or above the level of stored grain?
...and More!