Available on

Four Post Lift: Inspection and Maintenance Mobile App

Use the Four Post Lift: Inspection and Maintenance mobile app and read thoroughly before installing, operating, or maintaining this lift. When done with installation be sure to return documents to package and give all materials to lift owner/operator. When installation is complete be sure to run lift up and down a few cycles with and without “typical” vehicle loaded on lift. Failure to keep lift free of corrosive agents and solvents will lead to reduced component service life, cable failure, etc., which could result in property damage and/or personal injury. A thorough inspection of the lifting system must be performed quarterly by qualified lift service personnel; more frequently (monthly) under extreme service conditions such as outside installations or high usage (10 or more cycles per day, etc.).

Transportation & Warehousing mobile forms and apps for your team

Convert your inefficient paper Checklists and other forms to mobile versions with GoCanvas.

Want to learn more about GoCanvas?

Request a Demo

Take a Tour

Take a peek inside the Four Post Lift: Inspection and Maintenance Mobile App

Included Features

Our App Builder gives you the power to easily add and remove the ones you want. {{controller.show_all ? 'See included features.' : 'See more features.'}}

{{data.title}}

Included Fields

Customize to add, remove, or edit any of the fields below.

Date
Time
Location
Bay
Technician/Inspector
Signature
Cleanliness: Cables, Columns, Runways and other lift parts should be kept free of corrosive agen...
Fasteners: Check all the attaching bolts and nuts for tightness.
Fully raise lift.
a.
b.
c.
3. Hydraulic Cylinder
Inspect the hydraulic cylinder mounting to the runway.
Sheaves: Check sheaves (pulleys) for wear or damage, i.
Sheave Pins: Check for loose or missing sheave (pulley) pins.
Locking Latches and Slack Cable Devices: Watch locking latches and slack cable devices during li...
1. Cables
Clean wire rope cables with lift in both lowered and raised position by spraying with Penetratin...
Adjust cables using procedures on following pages.
Slack Cable Device: Inspect slack cable devices using procedure on page 5.
Column Anchor Bolts: Check column anchor bolts for tightness.
Columns: Look for corrosion, giving special attention to the area at the base of the column.
A thorough inspection of the lifting system must be performed quarterly by qualified lift service...
1. Cables
Inspect cables in both lowered and raised position.
a.
b.
...and More!