Available on

Recycled Water Service Plan: Cross-Connection Control Testing and Procedure Mobile App

The Recycled Water Service Plan: Cross-Connection Control Testing and Procedure mobile app intended as part of with a Recycled Water Program. A Recycled Water Program issues permits to users of recycled water produced at District's Recycled Water Facility. The Program monitors user compliance with all governing regulations for recycled water use. The Program is integrated into the overall organization of the District’s Wastewater Treatment Plan (WWTP). Recycled water is distributed to users through a District owned and operated distribution system. The system often serves large industrial customers as well as irrigation users. The app includes a detailed Control Testing and Procedure checklist. The procedures are to verify the absence of cross-connections between the potable water and recycled water supplies at sites which are served by both. These procedures also describe what to do in case cross-connection is discovered.

Inspections & Surveys mobile forms and apps for your team

Convert your inefficient paper Checklists and other forms to mobile versions with GoCanvas.

Want to learn more about GoCanvas?

Request a Demo

Take a Tour

Take a peek inside the Recycled Water Service Plan: Cross-Connection Control Testing and Procedure Mobile App

Included Features

Our App Builder gives you the power to easily add and remove the ones you want. {{controller.show_all ? 'See included features.' : 'See more features.'}}

{{data.title}}

Included Fields

Customize to add, remove, or edit any of the fields below.

Site Name:
Address:
Form Completed by:
Signature:
Date:
Prior to the cross-connection testing, a visual inspection of the dual system shall be conducted ...
) The Customer shall provide the Inspection Team with drawings of the recycled and potable water ...
) Discuss any changes to recycled and potable water systems since the last cross-connection test,...
) Verify that appropriate backflow prevention devices are installed and have been tested annually...
) Check meter locations of the recycled water and potable water lines to verify that no modificat...
) Discuss who has access to the recycled water system (e.
) Verify that required signs are in place and in good condition.
) Verify that all portable recycled water fixtures (e.
Comments
The Cross-Connection Test and Report Form (Form C-2) should be completed in conjunction with the ...
The basic concept employed in checking for cross-connections between the potable water and recycl...
The following procedure shall be used to determine if a cross-connection exists.
) The potable water system shall be activated and pressurized.
) The potable water system shall remain pressurized for a minimum of one hour.
) All outdoor potable water fixtures and all indoor drinking fountains shall be tested for flow.
) The recycled water system shall be tested for flow.
) Any drain points or outlets, on the recycled water system shall be checked for flow during and ...
) The potable water system shall then be shut down, and where feasible, drained.
) The recycled water system shall remain pressurized for a minimum of one hour.
) All outdoor potable water fixtures and all indoor drinking fountains shall be tested and inspec...
) If no flow is detected in any fixture, which would have indicated a cross-connection, the test ...
Comments
The Procedure if Cross-Connection is Discovered Form (Form C-3) should be used to document the pr...
...and More!