Available on

Rotary Screw Maintenance Checklist Mobile App

Use the Rotary Screw Maintenance Checklist mobile app when inspecting rotary screw compressors. The checklist is broken down into sections associated with a time period. The checklist contains procedures that should be conducted on a daily basis, weekly, monthly and yearly. Each section comes with pre-loaded inspection questions that just needs to be checked if it passes.

This preventive maintenance program assist you in checking energy efficiency and power consumption, air filter, oil filter, pressure settings, and much more.

All checklists for the rotary screw compressors are saved in the GoCanvas Cloud and can be printed or emailed as a PDF. This app can be downloaded to an iPhone, iPad, or Android device

Transportation & Warehousing mobile forms and apps for your team

Convert your inefficient paper Checklists and other forms to mobile versions with GoCanvas.

Want to learn more about GoCanvas?

Request a Demo

Take a Tour

Take a peek inside the Rotary Screw Maintenance Checklist Mobile App

Included Features

Our App Builder gives you the power to easily add and remove the ones you want. {{controller.show_all ? 'See included features.' : 'See more features.'}}

{{data.title}}

Included Fields

Customize to add, remove, or edit any of the fields below.

Date of Inspection:
Inspector's Name:
(8 hours maximum)
Monitor all gauges and indicators for normal operation
Check oil level
Drain control line filter
Observe for oil leaks
Observe for unusual noise or vibration
Fill out Daily Check List
(40 hours)
Check safety valve operation
Drain any air receivers in system
Drain water out of oil
Check to make sure moisture separator is draining
(160 Hours)
Service air filter as needed (daily or weekly if extremely dirty conditions exist)
Clean aftercooler and oil cooler fins (air-cooled only)
Wipe entire unit down to maintain appearance
(or 1000 Hours)
Take synthetic oil sample
Change compressor oil filter
Change petroleum oil
Go over unit and check all bolts for tightness
Check full load amps
Check all pressure settings
(2000 Hours)
Change oil separator every 4,000 – 6,000 hours with synthetic oil
Change air filter
...and More!