Medium

Available on

Apple Android Windows

Container and Collection Area Weekly Inspection Checklist Mobile App

The Container and Collection Area Weekly Inspection Checklist mobile app is used to guide required weekly inspections of hazardous waste containers and collection areas (satellite waste accumulation areas [SWAAs], waste accumulation areas [WAAs], and generic waste collection areas). These inspections need to be documented. When a storage area contains both hazardous materials and waste, the most restrictive combination of inspection requirements applies. For inspection requirements for hazardous materials, see Chapter 40, “Chemical Lifecycle Management”. The app inspects the following areas: Satellite Waste Accumulation Area, Accumulation Time, Other SWAA-specific Requirements, Hazardous Waste Items and Containers, Labeling, Container Condition, Container Management, Secondary Containment, Incompatible Materials, Empty Hazardous Materials Containers, Waste Accumulation Areas, Maintenance and Generic Waste and Collection Areas Accumulation Time. Requirements that may require an administrative or engineering remedy. Some of these items may not apply to all WAAs, depending on the storage area location.

Check out the GoCanvas app store for other Waste Management Apps. Use them for free with your GoCanvas Subscription.

  • Lendlease
  • The Cooperative
  • PG&E
  • Red Bull
  • Mirvac

Want to learn more about GoCanvas?

Request a Demo

Take a peek inside the Container and Collection Area Weekly Inspection Checklist Mobile App

Included Features

Our App Builder gives you the power to easily add and remove the ones you want. {{controller.show_all ? 'See included features.' : 'See more features.'}}

  • {{data.title}}

Included Fields

Customize to add, remove, or edit any of the fields below.

  • Ico date

    Date

  • Ico textbox

    Facility

  • Ico multiline

    Location

  • Ico textbox

    Inspector's Name

  • Ico textbox

    Job Title

  • Ico signature

    Inspector's Signature

  • Ico statictext

    This checklist is used to guide required weekly inspections of hazardous waste containers and col...

  • Ico statictext

    When a storage area contains both hazardous materials and waste, the most restrictive combination...

  • Ico statictext

    Satellite Waste Accumulation Area

  • Ico statictext

    All waste containers stored in an SWAA must also be inspected using Section B, “Hazardous Waste I...

  • Ico statictext

    Note All SWAAs must be formally designated as such by Waste Management, and all requirements list...

  • Ico dropdown

    If the maximum accumulation time of 320 days is nearing, Waste Management was contacted for removal

  • Ico dropdown

    Within 3 days of reaching the 55-gallon or 1-quart limit, the container was marked with the date ...

  • Ico statictext

    Other SWAA-specific Requirements

  • Ico dropdown

    The waste is accumulated in a container located at or near the point of waste generation

  • Ico dropdown

    The initial date of accumulation (that is, the date waste was first placed in the container) is c...

  • Ico dropdown

    The total amount of each waste stream present at each satellite accumulation point is equal to or...

  • Ico multiline

    Comments

  • Ico dropdown

    If the maximum accumulation time of 320 days is nearing, Waste Management was contacted for removal

  • Ico multiline

    Corrective Actions

  • Ico statictext

    Hazardous Waste Items and Containers

  • Ico statictext

    Also inspect the area using Section A for SWAAs or Section B for WAAs and generic waste collectio...

  • Ico statictext

    Labeling

  • Ico statictext

    Each container or item must be clearly marked with the following information

  • Ico dropdown

    The accumulation start date (that is, the date waste was first placed in the container).

  • Ico dropdown

    The words HAZARDOUS WASTE, waste composition, and physical state (solid or liquid)

  • Ico dropdown

    Any hazardous properties (specify: flammable, corrosive, toxic, reactivity, or any other hazards)

  • Ico dropdown

    Full identification: name and extension of waste generator,

  • ...and More!

Related Transportation & Warehousing Apps... and they're all free for GoCanvas subscribers!

App Name

HAZWOPER: Environmental Training Record

As part of developing and implementing HAZWOPER policies and procedures use the HAZWOPER: Environmental Training Record ...

App Name

Dangerous Waste Management Plan: Pain...

The Dangerous Waste Management Plan: Paint Booth Filters Procedure mobile app helps facilities that produce and store dan...

App Name

NORM Field Sampling Plan: Protocol fo...

Sampling and analysis should be completed for every 1000 cubic yards of material (cuttings) or per well, whichever is more...

App Name

8‐Hour HAZWOPER Training Refresher C...

The main point to remember when teaching an 8‐Hour HAZWOPER Refresher course is to make it as “site specific” as possible:...

App Name

Dangerous Waste Management Plan: Solv...

The Dangerous Waste Management Plan: Solvent Filters (Pd-680 Type Ii Or Iii) Procedure mobile app helps facilities that p...

App Name

Aide Memoire Infection Control

Health care-associated infections lead to death, disability and excess medical costs. Introduction of new technologies, in...

App Name

Health and Safety Plan (HASP): Health...

The purpose of the Health and Safety Plan (HASP): Health and Safety Plan Acceptance Form mobile app is to identify hazar...

App Name

Hazardous Materials Emergency Respons...

The Hazardous Materials Emergency Response Plan is designed to minimize hazards to human health and the resulting environ...

More Information