Medium

Available on

Apple Android Windows

Roadway Lighting Checklist Mobile App

The Contractor is required to complete the Roadway Lighting Checklist mobile app through the Contractor Inspection Certification section prior to requesting the lighting hookups by the City Light Department. The Contractor is required to check off on all the items in the app to expedite the hookups and final inspection performed by the City Light Department. If it becomes apparent during the final inspection that the Contractor did not verify these items, the Light Department will cease the hookups and inspection and require the Contractor to submit a new request. Upon certifying this app, the Contractor shall present this checklist to the Engineer who will coordinate the final inspection with the Light Department. It is recommended, but not required, for the Contractor to attend this final inspection, and the Contractor should indicate to the Engineer if they desire to attend this inspection. It will be the responsibility of the Engineer to notify the City Light Department when the punch list items have been completed.

  • Lendlease
  • The Cooperative
  • PG&E
  • Red Bull
  • Mirvac

Want to learn more about GoCanvas?

Request a Demo

Take a peek inside the Roadway Lighting Checklist Mobile App

Included Features

Our App Builder gives you the power to easily add and remove the ones you want. {{controller.show_all ? 'See included features.' : 'See more features.'}}

  • {{data.title}}

Included Fields

Customize to add, remove, or edit any of the fields below.

  • Ico statictext

    Instructions: The Contractor is required to complete this checklist through the Contractor Inspec...

  • Ico textbox

    Project:

  • Ico textbox

    Engineering Consultant (Project Inspector and Company):

  • Ico textbox

    Bid Request and CIP Number:

  • Ico textbox

    Inspector’s Email Address (To be filled in by the Inspector):

  • Ico textbox

    Electrical Contractor and Foreman:

  • Ico textbox

    City Project Manager:

  • Ico statictext

    Check one

  • Ico checkbox

    Entire project area.

  • Ico checkbox

    Specific phase or location on project.

  • Ico multiline

    Describe specific items that are excluded from this inspection request.

  • Ico checkbox

    Check if pole is plumb in both directions

  • Ico checkbox

    Check for loose hardware

  • Ico checkbox

    Check for 2 feet of wire tail(s) outside of base

  • Ico checkbox

    Check that bulb and photo eye are installed properly

  • Ico checkbox

    Check for installation at grade level

  • Ico checkbox

    Check for adequate crushed rock in and below JB

  • Ico checkbox

    Check for bushings on all conduits

  • Ico checkbox

    Check conduit height

  • Ico checkbox

    Check for adequate tails on wire ends

  • Ico checkbox

    Check condition of wires

  • Ico checkbox

    Check wires for temporary markings indicating direction

  • Ico checkbox

    Check lids for correct markings—labeled Electric and not Traffic

  • Ico checkbox

    Check hardware configuration

  • Ico checkbox

    Check for 2 feet wire tails above footing

  • Ico checkbox

    Check wires for temporary markings indicating direction

  • Ico checkbox

    Check for loose anchor bolt nuts

  • Ico checkbox

    Check base door location

  • ...and More!

Related Construction, Repair & Improvement Apps... and they're all free for GoCanvas subscribers!

App Name

Alteration Fire Safety Pre-Inspection...

The Alteration Fire Safety Pre-Inspection Checklist takes you through compliance issues that must be met prior to passing ...

App Name

Street Light Invoice Worksheet

The Street Light Invoice Worksheet mobile app allows contractors to complete an estimate for work and maintenance using a ...

App Name

Supplementary Tests - Annex A.18 - El...

This mobile application can be used to report on the Annex A.18 – Electrical Anti-Creep Device status, as recommended by t...

App Name

Electrical Work Order & Invoice (Deta...

This is a comprehensive and powerful application for tracking electrical contract work estimated and completed. This simpl...

App Name

Lighting Time and Material Form

The Lighting Time and Material Form is an invoice template app (also exports as a pdf doc) which allows for any lighting c...

App Name

Electrical Bidder Bid Log

The Electrical Bidder Bid Log app can track proposals from electricians for electrical work.  The electrical engineer will...

App Name

Permit to Work (Electrical) (UK)

Complete a Permit to Work (Electrical) (UK) form using a smartphone or tablet. The app records issue, receipt, clearance a...

App Name

Safety Inspection Checklist: Electric...

The Safety Inspection Checklist: Electrical Safety mobile app was designed for teams who work with electrical equipment in...

More Information