Medium

Available on

Apple Android Windows

17” G2 Rigging Sheave: Daily Inspection Checklist Mobile App

The 17” G2 Rigging Sheave: Daily Inspection Checklist mobile app explains the use and care of 17” G2 Rigging Sheaves. This sheave has solid aluminum side plates encasing the wheel and line retaining pins to help keep the line in the groove. The sheaves are available with shielded bearings, identified by orange side plates and the access to a grease fitting. Or, they are manufactured with sealed bearings, and can be identified by yellow side plates. The sealed bearing model can be run for up to a year without repacking with grease. Normally these sheaves are equipped with a cable shroud that covers the wheel to help retain the wireline in the wheel groove. The app is specific to 17” G2 Rigging Sheave Daily Inspections.

  • Lendlease
  • The Cooperative
  • PG&E
  • Red Bull
  • Mirvac

Want to learn more about GoCanvas?

Request a Demo

Take a peek inside the 17” G2 Rigging Sheave: Daily Inspection Checklist Mobile App

Included Features

Our App Builder gives you the power to easily add and remove the ones you want. {{controller.show_all ? 'See included features.' : 'See more features.'}}

  • {{data.title}}

Included Fields

Customize to add, remove, or edit any of the fields below.

  • Ico textbox

    Serial Number

  • Ico date

    Date

  • Ico checkbox

    Read entire manual before operating this equipment.

  • Ico checkbox

    If proper procedures are not followed, loads may disengage.

  • Ico checkbox

    A falling load can cause serious injury or death.

  • Ico checkbox

    Never use this product for hoisting personnel.

  • Ico checkbox

    Always anchor or hang the sheave via the clevis, never by way of the cover or any ancillary equip...

  • Ico checkbox

    Never apply more force than the Safe Working Load (SWL) listed on the affixed tag.

  • Ico checkbox

    The listed Safe Working Load is for the sheave assembly; the safe line tension will be less.

  • Ico checkbox

    Attachment to other equipment with lower SWL will reduce the allowable load.

  • Ico checkbox

    Always use a hand guard when the sheave is used around personnel.

  • Ico checkbox

    Always make sure the sheaves are properly maintained and properly rigged.

  • Ico checkbox

    Verify the following.

  • Ico checkbox

    All structural components are not bent, cracked, or otherwise damaged.

  • Ico checkbox

    Loading gate hinges freely through the fingers in the frame

  • Ico checkbox

    Gate pin can be easily inserted through the holes in the frame and is securely attached with a ...

  • Ico checkbox

    Manufacturing tag and safe working load tag are in place and are legible.

  • Ico checkbox

    Inspection tag is in place on the cover and stamped with an inspection date no greater than one y...

  • Ico checkbox

    Spiral pins are in place and securely retain the axle nuts on the axle.

  • Ico checkbox

    Wheel rotates freely and smoothly, check for any grinding or sticking, indicating damaged bearings.

  • Ico checkbox

    Gate pin and gate clip are undamaged, lock positively, and are securely attached with lanyards

  • Ico checkbox

    Clevis pivots freely and does not have excessive slop (more than 1/8”).

  • Ico checkbox

    Both setscrews are in place and the clevis is secure in the clevis housing .

  • Ico checkbox

    Cotter pin is securely retaining the clevis nut

  • Ico checkbox

    Quick release pins are undamaged, function properly, and are securely attached with lanyards

  • Ico multiline

    Comments

  • Ico textbox

    Name

  • Ico signature

    Signature

  • ...and More!

Related Construction, Repair & Improvement Apps... and they're all free for GoCanvas subscribers!

App Name

25”/30” Slickline or Flat-pack Sheave...

The 25”/30” Slickline or Flat-pack Sheave Slickline Final Inspection Slickline or Flat Pack Sheave mobile app includes a ...

App Name

Wireline Equipment: Minimum Documenta...

The wireline unit, well control equipment and associated equipment shall be suitable for the job and its intended purpose ...

App Name

Checklist for Wire Line Deck

Use the Checklist for Wire Line Deck mobile app with a smartphone or tablet to complete a wire line deck inspection. The a...

App Name

Slickline Operations: Pressure Contro...

The Slickline Operations: Pressure Control Equipment Inspection mobile app generates an easy to use checklist for pressure...

App Name

17” G2 Rigging Sheave: Recertificatio...

The 17” G2 Rigging Sheave: Recertification and Repairs Log mobile app explains the use and care of 17” G2 Rigging Sheaves....

App Name

Wireline Equipment: Well Control Syst...

The wireline unit, well control equipment and associated equipment shall be suitable for the job and its intended purpose ...

App Name

17” G2 Rigging Sheave: Loading

The 17” G2 Rigging Sheave: Loading mobile app explains the use and care of 17” G2 Rigging Sheaves. This sheave has solid ...

App Name

Wireline Equipment: Downhole Tools Re...

The Wireline Equipment: Downhole Tools Requirements (Normative) mobile app provides a helpful checklist of items to inspec...

More Information


Related Blog Posts