Medium

Available on

Apple Android Windows

Chip Spreader: Gate Sensor Failure Alarm (Rexroth Computer) Mobile App

The Chip Spreader: Gate Sensor Failure Alarm (Rexroth Computer) mobile app provides a troubleshooting checklist for Chipspreaders. This app is specific to a Gate Sensor Failure Alarm (Rexroth Computer) problem. GoCanvas worked with a partner (Data Collaborative) who developed the GoCanvas QuickBooks Apps and the software connector.

  • Lendlease
  • The Cooperative
  • PG&E
  • Red Bull
  • Mirvac

Want to learn more about GoCanvas?

Request a Demo

Take a peek inside the Chip Spreader: Gate Sensor Failure Alarm (Rexroth Computer) Mobile App

Included Features

Our App Builder gives you the power to easily add and remove the ones you want. {{controller.show_all ? 'See included features.' : 'See more features.'}}

  • {{data.title}}

Included Fields

Customize to add, remove, or edit any of the fields below.

  • Ico checkbox

    ) Check gate transducer on side indicated by digital display.

  • Ico checkbox

    ) Check for plug diconnected at sensor.

  • Ico checkbox

    a) Broken or pinched wiring

  • Ico checkbox

    b) Bad, corroded or loose connection

  • Ico checkbox

    ) Check transducer (fixed or variable hopper) potentiometer type see # 4.

  • Ico checkbox

    For units with solid state transducer (wiring color code red-blueblack)

  • Ico checkbox

    a) Make sure that gate is fully closed.

  • Ico checkbox

    b) Do not unplug sensor from harness (this sensor is checked by voltage related to sensor position).

  • Ico checkbox

    Adapter (Etnyre part # 7050350) is available so that tapping into and stripping wires is not needed.

  • Ico checkbox

    c) Check voltage on red wire terminal (voltage supplied to transducer) ground using black wire te...

  • Ico checkbox

    d) Check voltage on the blue wire terminal (transducer signal voltage) ground using black wire te...

  • Ico checkbox

    e) Make adjustment by rotating transducer if not within these parameters.

  • Ico checkbox

    f) Re-calibrate (null/scale) gate calibrations in computer set-up if adjustment was made.

  • Ico checkbox

    Material will need to be re-calibrated if transducer is adjusted.

  • Ico checkbox

    For units with resistor type potentiometer (wiring color code orange- green-black)

  • Ico checkbox

    4) Adjusting potentiometer (old type)

  • Ico checkbox

    a) Make sure that gate is fully closed.

  • Ico checkbox

    b) Unplug sensor from harness

  • Ico checkbox

    c) Check OHMS across the orange and green wire terminals at the connector attached to the potenti...

  • Ico checkbox

    d) Reading should be between (250 – 270 OHMS).

  • Ico checkbox

    e) Make adjustment if not within these perimeters.

  • Ico checkbox

    f) Re-calibrate (null/scale) gate calibrations in computer set-up if adjustment was made.

  • Ico checkbox

    NOTE: OHMS increase as gate opens, so it is critical not to exceed (270 OHMS) on this potentiometer.

  • Ico checkbox

    g) If failure is still present after transducer or potentiometer adjustment is made, proceed with...

  • Ico checkbox

    ) Check wiring for continuity between transducer or potentiometer and computer.

  • Ico checkbox

    6) Check connections at computer (Rexroth)

  • Ico checkbox

    Fixed hopper or Left gate + (P1-PIN10) Red

  • Ico checkbox

    Left gate – (P1-PIN18) Black

  • ...and More!

Related Construction, Repair & Improvement Apps... and they're all free for GoCanvas subscribers!

App Name

Chip Spreader: Hydraulic Oil Temperat...

The Chip Spreader: Hydraulic Oil Temperature Alarm mobile app provides a troubleshooting checklist for Chipspreaders. This...

App Name

Chip Spreader: Air Gates Out of Adjus...

The Chip Spreader: Air Gates Out of Adjustment mobile app provides a troubleshooting checklist for Chipspreaders. This app...

App Name

Chip Spreader: Overlap or Streak in C...

The Chip Spreader: Overlap or Streak in Center when Hoppers are Fully Extended mobile app is specific to discharge hoppers...

App Name

Paving: Joint Sealing Portland Cement...

The Paving: Joint Sealing Portland Cement Concrete Pavements mobile app is intended to cover the very basic duties of insp...

App Name

Chip Spreader: Speed Sensor Error (Fa...

The Chip Spreader: Speed Sensor Error (Failure) mobile app provides a troubleshooting checklist for Chipspreaders. This ...

App Name

Chip Spreader: Spreadroll Speed Fluct...

The Chip Spreader: Spreadroll Speed Fluctuating mobile app provides a troubleshooting checklist for Chipspreaders. This ap...

App Name

Paving: Erosion Control

The Paving: Erosion Control mobile app is designed to cover the very basic duties of inspection by reference to key activi...

App Name

Chip Spreader: Fuel Sender Alarm

The Chip Spreader: Fuel Sender Alarm mobile app provides a troubleshooting checklist for Chipspreaders. This app is specif...

More Information


Related Blog Posts