Medium

Available on

Apple Android Windows

Chip Spreader: Speed Sensor Error (Failure) Mobile App

The Chip Spreader: Speed Sensor Error (Failure) mobile app provides a troubleshooting checklist for Chipspreaders. This app is specific to a Speed Sensor Error (Failure). The reports that GoCanvas provides online for all of our users can be found within the "Reports" tab in GoCanvas .

  • Lendlease
  • The Cooperative
  • PG&E
  • Red Bull
  • Mirvac

Want to learn more about GoCanvas?

Request a Demo

Take a peek inside the Chip Spreader: Speed Sensor Error (Failure) Mobile App

Included Features

Our App Builder gives you the power to easily add and remove the ones you want. {{controller.show_all ? 'See included features.' : 'See more features.'}}

  • {{data.title}}

Included Fields

Customize to add, remove, or edit any of the fields below.

  • Ico statictext

    Check to make sure joystick is in neutral (alarm will sound if joystick is out of neutral and mac...

  • Ico checkbox

    1) Check fuses or circuit breakers

  • Ico checkbox

    2) Check speed sensor

  • Ico checkbox

    a) Check for loose sensor

  • Ico checkbox

    b) Poor alignment (see figure # 1A & 1B)

  • Ico checkbox

    c) Improper clearance- 1/16” recommended

  • Ico checkbox

    d) Loose wiring connection

  • Ico checkbox

    e) Pinched or rubbed wiring

  • Ico checkbox

    ) Check wiring from computer to speed sensor (with harness disconnected).

  • Ico checkbox

    a) Red wire (12 VDC)

  • Ico checkbox

    b) Black wire (ground)

  • Ico checkbox

    c) Clear or white wire (signal 9-10 VDC)

  • Ico checkbox

    d) Shield (ground)

  • Ico checkbox

    If voltages and grounds are (OK), proceed with step # 4

  • Ico checkbox

    If voltages and grounds are (NOT OK), proceed with step # 5

  • Ico checkbox

    4) Check power at speed sensor (with harness connected)

  • Ico checkbox

    a) Red wire (12 VDC)

  • Ico checkbox

    b) Black wire (ground)

  • Ico checkbox

    c) Clear or white wire (signal 4-7 VAC while machine is moving) No signal, replace speed sensor

  • Ico checkbox

    d) Shield (ground)

  • Ico checkbox

    5) Check connections at computer (with speed sensor disconnected)

  • Ico checkbox

    a) P1-PIN 21 (speed sensor power 12 VDC)

  • Ico checkbox

    If voltage is (OK) but no voltage was present in step # (3a) check wiring between computer and sp...

  • Ico checkbox

    If no continuity is present, replace harness asm.

  • Ico checkbox

    No voltage - bad connection or bad computer output.

  • Ico checkbox

    b) Ground (attached to computer base)

  • Ico checkbox

    c) P3-PIN 10 (9-10 VDC)

  • Ico checkbox

    If voltage is (OK) but no voltage was present in step (3c) check wiring between computer and spee...

  • ...and More!

Related Construction, Repair & Improvement Apps... and they're all free for GoCanvas subscribers!

App Name

Paving: Joint Sealing Portland Cement...

The Paving: Joint Sealing Portland Cement Concrete Pavements mobile app is intended to cover the very basic duties of insp...

App Name

Chip Spreader: Spreadroll Speed Fluct...

The Chip Spreader: Spreadroll Speed Fluctuating mobile app provides a troubleshooting checklist for Chipspreaders. This ap...

App Name

Paving: Dowel-Bar Retrofit for Portla...

The Paving: Dowel-Bar Retrofit for Portland Cement Concrete Pavement mobile app was developed to cover the duties of inspe...

App Name

Cold Planer: Delivery Dealer's Checklist

After the Cold Planer has been completely setup and attached to the host machine, inspect using the Cold Planer: Delivery ...

App Name

Paving: Erosion Control

The Paving: Erosion Control mobile app is designed to cover the very basic duties of inspection by reference to key activi...

App Name

Chip Spreader: Fuel Sender Alarm

The Chip Spreader: Fuel Sender Alarm mobile app provides a troubleshooting checklist for Chipspreaders. This app is specif...

App Name

Chip Spreader: Checking Solid State G...

The Chip Spreader: Checking Solid State Gate Transducer mobile app provides a troubleshooting checklist for Chipspreaders....

App Name

Chip Spreader: Hydraulic Stand-By Loa...

The Chip Spreader: Hydraulic Stand-By Load Sense) Pressure is Fluctuating mobile app provides a troubleshooting checklist ...

More Information