Available on

Transload Safety: Cranes, Hoists and Rigging Equipment Mobile App

The Transload Safety: Cranes, Hoists and Rigging Equipment mobile app was developed promote safe job practices for transload facilities that load and unload both dry bulk cargo and hazardous materials. This app specifically covers cranes, hoists and rigging equipment rules to minimize transloading railcar and tank truck job hazards and equipment related accidents. Always use good judgment when your load and unload from a rail car, tank car or truck, following the safest course available. No action should ever be taken until you are fully aware of the hazards involved and have a plan to proceed safely. This app contains cranes, hoists and rigging equipment information related to rail work activities and also provides recommended loading guidelines that have been found to promote transloading safety. Cranes, hoists and rigging equipment rules must be complied with at all times. Cranes, hoists and rigging equipment guidelines are recommendations and must be followed unless another method is known to be as safe or safer after discussing and agreeing to the new procedure with a supervisor. This app allows you to documents that employees perform their rail car load and unload duties in a safe manner that is compliant with Federal, State, and local requirements as well as transloading facility policies and procedures. A PDF is generated for transloading facility safety records.

Construction, Repair & Improvement mobile forms and apps for your team

Convert your inefficient paper Checklists and other forms to mobile versions with GoCanvas.

Want to learn more about GoCanvas?

Request a Demo

Take a Tour

Take a peek inside the Transload Safety: Cranes, Hoists and Rigging Equipment Mobile App

Included Features

Our App Builder gives you the power to easily add and remove the ones you want. {{controller.show_all ? 'See included features.' : 'See more features.'}}

{{data.title}}

Included Fields

Customize to add, remove, or edit any of the fields below.

Name of Port
Terminal
Safety Check Date
Examiner
Examiner Signature
1. Requirements
a.
Master clutch is off
Machine brakes are set
Load is lowered to the ground
b.
c.
2. Lifting
a.
Ensure that a designated employee will direct movement and give signals.
The operator must stay at the controls when a load is suspended
Return cranes and hoists to neutral and secure positions when not in use
When lifting heavy loads, test the brakes when the load is suspended a few inches above the floor...
3. Outriggers
a.
4. Load Clear of Persons
a.
b.
5. Passengers
a.
6. Restrictions Near Hoisting Equipment
a.
Do not walk, stand, or work under a suspended load.
...and More!