Available on

Employee Safety - Automotive Lifts Operation, Inspection and Maintenance Checks Mobile App

The purpose of the Employee Safety - Automotive Lifts Operation, Inspection and Maintenance Checks mobile app to provide a basis for common understanding among service personnel as to the minimum requirements for operating, inspecting and maintaining automotive lifts. Each Automotive shop shall have the following standards and literature available for reference, training and posting. ANSI Standard ANSI/ALI ALCTV- 1998 American national Standard for Automotive Lifts – Safety Requirements for Construction, Testing and Validation. ANSI Standard ANSI/Ali ALOIM 2000 American Nation Standard for Automotive Lifts – Safety Requirements for Operation, Inspection and Maintenance ANSI Standard ASME PALD – 2003, Safety Standard for Portable Automotive Lifting Devices. The principal/site supervisor should ensure that employees who operation automotive lifts are instructed in the safe use and operation of the lifts using the Reference Standard.

Transportation & Warehousing mobile forms and apps for your team

Convert your inefficient paper Inspections and other forms to mobile versions with GoCanvas.

Want to learn more about GoCanvas?

Request a Demo

Take a Tour

Take a peek inside the Employee Safety - Automotive Lifts Operation, Inspection and Maintenance Checks Mobile App

Included Features

Our App Builder gives you the power to easily add and remove the ones you want. {{controller.show_all ? 'See included features.' : 'See more features.'}}

{{data.title}}

Included Fields

Customize to add, remove, or edit any of the fields below.

Date
Employee's Name
Employee Signature
The purpose of this standard is to provide a basis for common understanding among School District...
Each Automotive shop shall have the following standards and literature available for reference, t...
ANSI Standard ANSI/ALI ALCTV- 1998 American national Standard for Automotive Lifts – Safety Requi...
ANSI Standard ANSI/Ali ALOIM 2000 American Nation Standard for Automotive Lifts – Safety Requirem...
ANSI Standard ASME PALD – 2003, Safety Standard for Portable Automotive Lifting Devices
The principal/site supervisor shall ensure that employees and student who operation automotive li...
The principal/supervisor shall ensure that employee and student training are documented.
The operator shall operate the automotive lift only after being properly instructed or trained in...
The use of an automotive lift must follow a rate of capacity that is visibly indicated by the man...
The operator shall use all applicable safety features provided on the automotive lift, and operat...
The operator of the lift shall be responsible for maintaining the cleanliness and orderliness of ...
The District shall take all appropriate steps to follow the recommended inspection procedures of ...
Accessibility and readability of the operation procedures, safety tips and generic safety material
Accessibility and readability of safety warning labels and related load capacity of lift
Proper operation of lift controls, restraints and locking device
Deformation and excessive wear on any lift structural components
Deformation and excess wear of other components such as hoses, electrical wires, drive chains, ca...
Damage or excessive wear on any of the lift contact points which engage the tires, frame, body or...
Evidence of hydraulic or pneumatic leak
Unusual noises, sudden movements, erratic operation or evidence of chips or filings during use
Cracks or loose concrete around floor anchors bolts if employed
If any of the conditions described above are observed before, during or after operation of the li...
If any of the conditions listed above are observed, the lift shall not be used until the cause of...
Monthly Inspections
Monthly inspections shall be conducted following the recommendations of the lift manufacturer.
...and More!